Southern California Motorcycles

  • 515 West Lambert Rd
  • Brea, CA 92821
  • Call Us: (714) 256-6700
  • https://socalmotorcycles.com/
Print This Page

2021 Marin Bikes Alpine Trail E1 L

Retail Price

$4,899.00

Information

2021 Marin Bikes Alpine Trail E1 L

MOUNTAIN BIKING WITH A BOOST
  • BEYOND CAPABLE, BOTH UP AND DOWN, IN EVEN THE MOST CHALLENGING TERRAIN
  • MAXIMIZING FUN

The Alpine Trail E will take you further, faster, allowing you to tackle the most aggressive trails either up or down.

Features may include:
  • SERIES 4 ALUMINUM FRAME

Alpine Trail E models are built upon our Series 4 aluminum frames, with detailed forgings, highly manipulated tubes, and full internal cable routing, giving the rider the highest-end alloy frame that Marin offers, compatible with modern coil or air shocks.

  • MULTITRAC SUSPENSION

The Alpine Trail E features the same great, proven MultiTrac suspension technology, but optimized for the Shimano STEPS system. With this combination there is no need for platform or lockout levers, just get on and blast up the hills.

  • MIXED WHEEL SIZES

29” front and 27.5”+ rear wheel sizes are the ideal combination for the Alpine Trail E, with larger front wheel easily rolling over most any trail obstacle and offering the best cornering traction, while the burly 27.5” x 2.8” rear setup adds playfulness and enhances acceleration and braking traction.

  • DROPPER POST OPTIMIZED

The modern day trail rider needs their saddle out of the way at times, while low-slung frames require longer length posts. On the Alpine Trail E, seat tube lengths have been minimized, along with minimum insertion depths, so that riders of all sizes can get the proper extension needed.

Photos

Highlights

  • Brea, California
  • 2021
  • Marin Bikes
  • Alpine Trail E1 L
  • Available
  • Handlebar: 780 mm
  • BB: 340.5 mm | Standover: 686.8 mm

Specifications

  • 2021
  • Marin Bikes
  • Alpine Trail E1
  • L
  • Electric
  • Stack: 631 mm | Reach: 485 mm | Headtube Angle: 63° | Seattube Angle: 78° | Toptube Effective: 619 mm | Bb Drop: 28 mm | Chainstay: 435 mm | Fork Offset: 44 mm | Seatpost Diameter: 30.9 mm
  • Headtube: 120 mm | Seat tube: 425 mm | Stem: 35 mm | Crank: 165 mm
  • BB: 340.5 mm | Standover: 686.8 mm
  • Handlebar: 780 mm
  • 1264 mm
  • Shimano STEPS E7000, 250W, 60Nm
  • BT-8035, Internal 504Wh
  • Set: Derailleur Rear: Shimano Deore 5100 Direct Attachment, 10-Speed | Bottom Bracket: Marin Forged Alloy 165mm Length, Narrow Wide 38T Chainring, e13 Plus Chain guide, Aluminum Plate
  • Lever: Shimano Deore M4100-R, I-Spec EV, 10-Speed
  • KMC X-10E, E-Bike Specific, Silver
  • Cassette: Shimano Deore M4100-10 10-speed 11-46T
  • Marin MTB Plastic
  • All New Series 4 Alloy Frame, 150mm Multitrac suspension, Integrated Battery/On-switch/Charging Port, 148mm Rear Thru-Axle, Built-in Rear Speed Sensor
  • Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back
  • Post: TranzX, YSP23JL, 1x Remote, 150 mm, 30.9mm
  • Marin Single Clamp Locking
  • Rock Shock 35 Gold RL 29", Motion Control Damper, 160mm Travel, Maxle Stealth Axle, 44mm Offset
  • Rock Shock Super Deluxe Coil R, Rebound Adjustment, 205x65mm, 25mmxM8 Lower Hardware, S/M Spring Rate = 300lb, L/XL Spring Rate = 400lb
  • Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible
  • Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor
  • Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor w/ Speed Sensor
  • Rear: Shimano HB-MT400B, 148x12mm, Centerlock, Standard Freehub Body | Front: Shimano MT-410B, 110x15mm, Centerlock Disc, 32H
  • Front: Marin Aluminum Double Wall, 29" Diameter, 32mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible; Rear: Marin Aluminum Double Wall, 27.5" Diameter, 38mm Inner Rim Width, Pinned Joint, Disc Specific, Tubeless Compatible
  • Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible
  • Front: Maxxis Assegai 29x2.5", 3C MaxxTerra, Double Down, Tubeless Compatible Rear: Maxxis Minion DHR II 27.5x2.8, 3C Maxx Terra, EXO+, Tubeless Compatible
  • Spoke: 14g Black Stainless Steel | Stem: Marin 3D Forged Alloy, 35mm | Headset: FSA No 57, Sealed Cartridge Bearings, 1 1/8" x 1 1/2” | Saddle: Marin E-MTB Saddle | Display: SC-E7000 Display | Switch: SW-E7000 Left Hand Switch for Assist Mode Change | Extras: Shimano Battery Charger EC-E6002, Bolt-on Thru-Axle